水泵凍住結冰、水管也凍裂了怎么辦？
近來溫度驟降，突如其來的寒潮，使上海等江南地區都瞬間寒風凜冽，刺骨冰冷。
有客戶抱怨：這寒潮來得有點兇猛，上海這邊都有零下7℃了，現在水泵和水管都結冰了怎么辦？
還有客戶說：如果泵凍結了怎么辦？天氣太冷了。泵凍結了。用幾壺開水倒都不行。我該怎么辦？郁悶的！誰給支支招啊！
更有客戶說：北方的地區自來水系統使用的水泵大多為自吸泵,一到冬天容易結冰,針對這種情況我們應該采取什么措施對水泵就地維護呢？
水泵一到冬天就很容易凍住，針對這種情況上海龍亞泵業教您如何對各種水泵和水管被凍住的解決方案：
首先我們說水管方面的，其實我們應該用流動的水去化凍，不要急功近利的用其他的高溫化凍，因為溫差過大會造成損壞的。如果沒有自來水溶解的條件,可以考慮用電吹風解決,但是不要把出風的溫度調得過高。如果管路已經凍裂，那么只能更換了。
如果是塑料管，可以采用原先的管道專用熱熔器焊接；熱熔器是一種專業的焊接工具，用于熱塑性塑料管道和模具的加熱、熔化，然后將它們連接起來。熱熔器在連接管道和管件的過程中起著重要的作用。
如果是金屬管則將原來凍裂的管路拆除后，用電焊機重新焊接，待焊點冷卻后用溫水或者氣泵試壓試漏。
以下是針對水泵的預防結冰凍裂的方案：
方案一：將泵內的水排空，使用時加水。防止泵凍裂；
方案二：如果鈦龍水泵結冰，可用熱水或沸水倒入水泵內融冰。或加熱水泵外殼；
方案三：使用WATERSUNNY井下泵。把泵放進井里。一般情況下，泵離地面較深，不會結冰；
方案四：采用VAREM保溫型水泵。在保溫層中加入蒸汽或熱水。防止泵凍結；
方案五：采用ZILMET非自吸離心泵。使用時，加水；
方案六、讓泵的工作環境保持在0℃以上。
如果水泵已經凍裂，那么只能更換水泵或者水泵凍裂的泵體。
好了，以上就是水泵和水管結冰凍裂的預防措施和解決方案，更多水泵問題歡迎與上海龍亞水泵技術部探討。

How to do if the water pump freezes and the water pipe is cracked?
Recently, the temperature has dropped sharply, and the sudden cold wave has made Shanghai and other areas in the south of the Yangtze River cold.
Recently, a customer complained: the cold wave is a bit fierce. There is minus 7 ℃ in Shanghai. Now the water pump and water pipe are frozen. What should we do?
Another customer said: what if the pump freezes? It's too cold. The pump is frozen. A few pots of boiling water won't do. What should I do? Depressed! Who's going to give me a move!
Moreover, the customer said: most of the water pumps used in the north water supply system are Self-priming pumps, which are easy to freeze in winter. In view of this situation, what measures should we take to maintain the pumps on site?
Water pumps are easy to freeze in winter. In view of this situation, Shanghai Longya Pump Co., Ltd. will teach you how to solve the problem of various water pumps and water pipes being frozen
First of all, we talk about water pipes. In fact, we should use flowing water to thaw. We should not use other high temperature to thaw for quick success and instant benefit, because excessive temperature difference will cause damage. If there is no water dissolving condition, you can consider using an electric hair dryer to solve the problem, but don't adjust the air temperature too high. If the pipe has been cracked, it can only be replaced.
If it is a plastic pipe, it can be welded with the original pipe special hot melter; the hot melter is a professional welding tool, which is used to heat and melt the thermoplastic pipe and mold, and then connect them. The hot melter plays an important role in the process of connecting pipes and fittings.
If it is a metal pipe, remove the original frozen cracked pipe and re weld it with an electric welding machine. After the welding spot is cooled, test the pressure and leakage with warm water or air pump.
The following is the scheme for preventing freezing and cracking of water pump:
Scheme 1: empty the water in the pump and add water when using. Prevent the pump from freezing and cracking;
Plan 2: if the TaiLong pump freezes, hot water or boiling water can be poured into the pump to melt the ice. Or heating water pump shell;
Scheme 3: use the downhole pump of WATERSUNNY. Put the pump into the well. In general, the pump is deep from the ground and will not freeze;
Scheme 4: adopt Varem heat preservation water pump. Add steam or hot water to the insulation. Prevent the pump from freezing;
Scheme 5: Zilmet non self priming centrifugal pump is adopted. When in use, add water;
Scheme 6: keep the working environment above 0 ℃.
If the pump has been cracked, then only replace the pump or pump body.
Well, the above are the preventive measures and solutions for freezing and cracking of water pumps and water pipes. More pump problems are welcome to discuss with Shanghai Longya pump technology department.